Strong, versatile Winch Bumper Guards Offer More Than Protection

Bolting on a Go Rhino winch bumper guard combines protection with utility. A lot of truck owners look to put a layer of steel over the grille and bumper so that the risk of damage to the area is significantly reduced. But installing a Go Rhino winch bumper guard offers an additional feature – the ability to pull. There are two options, depending on truck model. The Go Rhino winch bumper guard HD is meant for “heavy duty” towing, offering the strength to connect up to 16,500 lbs. The standard version offers a winching capacity of 9,500 lbs. This setup is employed mostly by residential drivers. HD Go Rhino winch bumper guards are often used by commercial contractors and carpenters.

Multiple attributes highlight this part. Winch bumper protectors are modular and are divided into three sections. This can be advantageous for two reasons. The first is because during installation, you can level the pieces as you go. The second reason is because it gives you the option to remove the brush guards as you see fit and put them back on at a later time. Of course, you can also order a winch bumper protector that comes without the brush protectors and is the center section only. Whichever variant you choose, it will be conducive to off-roading. All winch bumper protectors come with pre-drilled holes for two off-road lights.

An important item to note is the material. Rhino bumper grille guards are made of stainless steel, including the winch plate (if applicable). Stainless steel is not only extremely durable, but it is also resistant to rust and corrosion. A steel Rhino bumper grille guard can protect against many hazards. Low-grade impact from bicycles, shopping carriages, and even other vehicles cease being an issue. Even inclement weather and debris from the trail are defended against. Rhino bumper grille guards stave off rocks, sticks, and other debris, as well.

Installation does not require drilling, but there may be light cutting. For many trucks, you will be required to cut the center section of the bumper valance prior to installing your Rhino winch guard. This can be done with a simple utility knife. The amount you will have to cut will depend on your model’s specifications. Truck bumper guards come in either polished stainless steel or black powder coat.

Leave a Reply