DriveShaft Shop Level 5.9 Axle/Hub kit - UltraRev.com

Cart is empty

View cart|

Printable version

Free Shipping at Ultrarev on Order Over $50

Select Make/Model

Make:
Model:
Year:

Gift Shop

Gift Certificates
Ultrarev Apparel

Authentication

News

04/03/2012

Previous news

Your cart

	Cart is empty

View cart
Wish list
Orders history
Returns

Help

Ultrarev.com :: Clutches & Driveline :: Axles & Drive Shafts :: Driveshaft Shop AC25 Level 5.9 Axle/Hub kit

Driveshaft Shop AC25 Level 5.9 Axle/Hub kit - SKU # AC25

90-93 Integra / B-series/Hydro Level 5.9 kit. The new level 5.9 axle/hub set, similar to our Level 5 system but with some major upgrades, the inner cv and now featuring our new tapered high quality aircraft grade axle bars. We now have created a Pro race worthy system that works with the standard spline size on the differential end, that can be used with Quaife, Wavetrac and other aftermarket limited slip diffs and spools. What we have done is made a new ball & cage inner cv from high quality chromoly. This inner cv now has 6 contact points and is stronger than a Porsche 930 (108mm) cv (same cv used by many high dollar systems). This along with the 33 spline outer and new 36 spline tapered bars makes it the strongest set of axles to date. The Kit comes with both axles and a set of custom hubs that will fit the stock bearing sizes and extended ARP studs. This system is designed for 850WHP and tire size will not affect its strength.
Also, don't forget to check out our intermediate bars and spools also listed on the site. If you need this system custom made please don't hesitate to call/e-mail, we have an entire wall of axle bars in many different sizes and we would be able to make a custom set in a very short time. DSS is dedicated to bringing you the best drivetrain products at a an affordable price. When you're serious look our way.

*Update*

Recently OBX tried to duplicate our Level 5.9 axle. We tested the OBX axle against the original style 5.9 axle and the new version with tapered bars that we currently offer. Here are the results of the destructive testing:
OBX axles- withstood 3300 ft-lbs and 55 degrees twist (this is what a Level 2.9 axle breaks at, a Level 3.9 is about 3700 ft-lbs)
The original Level 5.9 axle (previous version) withstood 4850 ft-lbs and 80 degrees twist.
The new Level 5.9 axle with tapered bars(currently available) - 5400 ft-lbs and 250 degrees twist!!!!

The Level 5.9 axles, often imitated but NEVER DUPLICATED.

Sorry no ABS Rings on this system (for system with ABS rings see part #AC25ABS).

Please note: The B-series Level 5.9 kits will only work with the hydraulic intermediate shaft (94-01 Integra/99-00
Civic Si etc.)

FREE SHIPPING ON ALL ORDERS $50 OR MORE! Discount-Sale

Note: Product Images May Not Be Vehicle Specific. 90-93 Integra / B-series/Hydro Level 5.9 kit. The new level 5.9 axle/hub set, similar to our Level 5 system but with some major upgrades, the inner cv and now featuring our new tapered high quality aircraft grade axle bars. We now have created a Pro race worthy system that works with the standard spline size on the differential end, that can be used with Quaife, Wavetrac and other aftermarket limited slip diffs and spools. What we have done is made a new ball & cage inner cv from high quality chromoly. This inner cv now has 6 contact points and is stronger than a Porsche 930 (108mm) cv (same cv used by many high dollar systems). This along with the 33 spline outer and new 36 spline tapered bars makes it the strongest set of axles to date. The Kit comes with both axles and a set of custom hubs that will fit the stock bearing sizes and extended ARP studs. This system is designed for 850WHP and tire size will not affect its strength. Also, don't forget to check out our intermediate bars and spools also listed on the site. If you need this system custom made please don't hesitate to call/e-mail, we have an entire wall of axle bars in many different sizes and we would be able to make a custom set in a very short time. DSS is dedicated to bringing you the best drivetrain products at a an affordable price. When you're serious look our way. Update* Recently OBX tried to duplicate our Level 5.9 axle. We tested the OBX axle against the original style 5.9 axle and the new version with tapered bars that we currently offer. Here are the results of the destructive testing: OBX axles- withstood 3300 ft-lbs and 55 degrees twist (this is what a Level 2.9 axle breaks at, a Level 3.9 is about 3700 ft-lbs) The original Level 5.9 axle (previous version) withstood 4850 ft-lbs and 80 degrees twist. The new Level 5.9 axle with tapered bars(currently available) - 5400 ft-lbs and 250 degrees twist!!!! The Level 5.9 axles, often imitated but NEVER DUPLICATED. Sorry no ABS Rings on this system (for system with ABS rings see part #AC25ABS). Please note: The B-series Level 5.9 kits will only work with the hydraulic intermediate shaft (94-01 Integra/99-00 Civic Si etc.)
Details


SKU	AC25
Weight	45.00 lbs
Details	1-yr. warranty
Price:	$1664.99 ( $1964.69 ) You Save: 15.25%

This product fits the following:

Make	Model	Year	Engine Type	Application Note	Detail	Color
Acura	Integra	1990 - 1993	(N/A)	(DA) 850HP, must use 94+ integra spindle & hydro intermediate bar (no ABS)	1-yr. warranty	(N/A)
Honda	Civic	1988 - 1991	(N/A)	850HP, B- Series DOHC w/Cable Clutch (except Y1) (EF Chassis) (exc. HF), (both axles are male), must use 93 integra spindle & hydro inter	1-yr. warranty	(N/A)
Honda	Civic	1988 - 1991	(N/A)	800HP, B-Series DOHC Motor w/Cable Clutch and Y1 trans (The Y1 transmission will have an intermediate bar hanger bracket with SH3 on the casting) (EF Chassis) (exc. HF), (both axles are male left is shorter), must use 93 integra spindle & hydro inter	1-yr. warranty	(N/A)
Honda	Civic	1988 - 1991	(N/A)	850HP, B-Series DOHC Motor w/Hydraulic Clutch (EF Chassis) (exc. HF), (left axle is female/right male), must use 93 integra spindle & hydro inter	1-yr. warranty	(N/A)
Honda	CR-X	1988 - 1991	(N/A)	850HP, B- Series DOHC w/Cable Clutch (except Y1) (EF Chassis) (exc. HF), (both axles are male), must use 93 integra spindle & hydro inter	1-yr. warranty	(N/A)
Honda	CR-X	1988 - 1991	(N/A)	800HP, B-Series DOHC Motor w/Cable Clutch and Y1 trans (The Y1 transmission will have an intermediate bar hanger bracket with SH3 on the casting) (EF Chassis) (exc. HF), (both axles are male left is shorter), must use 93 integra spindle & hydro inter	1-yr. warranty	(N/A)
Honda	CR-X	1988 - 1991	(N/A)	850HP, B-Series DOHC Motor w/Hydraulic Clutch (EF Chassis) (exc. HF), (left axle is female/right male), must use 93 integra spindle & hydro inter	1-yr. warranty	(N/A)

Quantity

Add to cart

Add to wish list

Send to friend